Chassis Kit Includes:
- Accelerator Bellcrank to Firewall: Hex Washer Head Sheet Metal Screws (3)
- Axle Housing to Springs: 5" U-Bolts, Flange Nuts (12)
- Axle Retainer Plates: T-Bolts, Lock Nuts (16)
- Brake Cables to Body: Hex Washer Head Sheet Metal Screws, Retainers, Nut (12)
- Brake Caliper Brackets to Spindle: Grade-8 Hex Washer Head Bolts, Flange Nuts (16)
- Brake Caliper Shields: Hex Screw and External Tooth Washer Assembly (4)
- Brake Calipers to Brackets: Shoulder Hex Bolt (4)
- Brake Drum Retainers: Green Push-On Retainers (6)
- Front Brake Hose Brackets to Body: Hex Head Heavy-Duty Machine Screws (2)
- Brake Hoses to Bracket: U-Clips (3)
- Brake Light Switch: Retaining Pin (1)
- Coil Spring Perches: 3/8"-24 Marsden Hex Nuts (4)
- Lower Control Arms to Shock Tower: Hex Bolts, Nuts, Split Washers (6)
- Upper Control Arms to Shock Tower: Grade-8 1/2"-20 Knurled Bolts, Flange Nuts (8)
- Front Tubular Crossmember: Special Hex Countersunk Bolts (2)
- Differential Carrier to Housing: Cadmium Lock Nuts, Copper Washers (20)
- Distribution Block to Apron: Hex Machine Screw (1)
- Driveshaft: 5/16" U-Bolts, Lock Nuts (6)
- Engine Body Brackets: Pointed Hex Washer Head Bolts "RBW", Flange Nuts (12)
- Engine Insulator to Block: Hex Bolts, Split Washers (8)
- Engine Insulator to Body Brackets: Lock Nuts, Flat Washers (8)
- Dual Exhaust Hangers: Carriage Bolts, Hex and Phillips Pan Head Screws, Nuts (20)
- Gas Tank: Hex Washer Head Sheet Metal Screws (11)
- Gas Tank Filler Neck with Twist Cap: Hex Washer Head Sheet Metal Screws (5)
- Chassis Grease Plugs: Hex Plugs (9)
- Idler Arm: Hex Bolts "F", Lock Nuts, Clipped Washers (6)
- Front Eye Leaf Springs: Pointed Hex Bolts, Flange Nuts, Washers (6)
- Master Cylinder without Power Brakes: Hex Screw and Split Washer Assembly (2)
- Power Steering Cylinder Bracket to Body: Hex Bolts "F", Hex Nuts, Washers (8)
- Power Steering Hose Support Insulator Retainer: Hex Washer Head Machine Screw (1)
- Parking Brake Control to Body: Phillips Pan Head Screw/External Tooth Washer Assembly, Caged/Lock Nuts (8)
- Pitman Arm to Gear Box with 1.0" Shaft: 1-1/8" Hex Jam Nut, Split Washer (2)
- Proportioning Valve to Apron: Serrated Hex Flange Screw (1)
- Rear Shackle Assembly: Marsden Hex Nuts (4)
- Front Shock Brackets: Lower Heavy-Duty Carriage Bolts, External Nut and Washer Assembly (12)
- Front Shocks: External Hex Screw/Washer Assembly "SEMS", Lock Nuts, Washers (12)
- Front Stabilizer Bar to Body: Hex Bolts, Lock Nuts (8)
- Front Stabilizer End Links: Bolts, Retainers, Bushings, Spacers, Nuts (22)
- Steering Gear Box: Hex Bolts, Clipped Flat and Split Washers (9)
- Steering Linkage with Power Steering: Slotted Nuts, Cotter Pins, Flat Washer (25)
- Strut Rods to Lower Control Arm: Hex Bolts, Lock Nuts (8)
- Rear Suspension Bumper: Hex Screws (2)
- Front Suspension Bumpers: External Nut and Washer Assembly (2)
- Transmission Crossmember: Pointed Flange Bolts, Lock Nuts, Washer (5)
- Transmission Insulator: (10)
- Wheel Cylinders: 5/16"-18 Hex Screw and External Tooth Washer Assembly (4